Sitroms Posted March 30, 2019 Share Posted March 30, 2019 Hi! Here is my newest model! It is re-creation of a car of the GateKeeper roller coaster located in Cedar Point, USA. I have found no drawing of this B&M coaster, so one of the big steps of this project was to model the car on a CAD software. You’ll find several inaccuracies about pieces’ shapes and colors, but the final result suits me. The car’s dimensions are 44 x 11 x 15 cm^3. The model is placed on a homemade base and is illuminated by 21 LEDs. The base is powered by an USB port. I can send you all STL file you want if you need it, so just ask! I just remind you that no piece is certified to be exactly like the original. The main steps of this project were: - To find pictures of the real coaster and to recover some screenshots on the NL2 software (blueprints for Solidworks) - To model the car on Solidworks. The final assembly is made of approx. 160 pieces. - To print all pieces on my 3D printer (CR-10 with a PLA filament) - To smooth all pieces’ surfaces with the XTC-3D resin and a sandpaper - To paint all pieces with an aerograph and a brush - To make the base of the model and its electronics part - To assemble all pieces and to varnish it This project took approx. 200 hours of work. Here are the pictures of the car modelled in Solidworks (materials and textures have not been assigned). The next post presents the final result ! What do you think ? Link to comment Share on other sites More sharing options...
Sitroms Posted March 30, 2019 Author Share Posted March 30, 2019 The result ! Link to comment Share on other sites More sharing options...
Sitroms Posted March 30, 2019 Author Share Posted March 30, 2019 Part 2 ! Wires normally don't go in the middle hole... Link to comment Share on other sites More sharing options...
anonymouscactus Posted March 30, 2019 Share Posted March 30, 2019 Wow, very cool! Looks perfect, but damn that's a lot of work. Good job! Link to comment Share on other sites More sharing options...
SixFlagsAstroworld Posted March 31, 2019 Share Posted March 31, 2019 The detail is pretty cool! Great work! Link to comment Share on other sites More sharing options...
Dombot Posted March 31, 2019 Share Posted March 31, 2019 Holy cow, that's amazing. Spectacular work! Link to comment Share on other sites More sharing options...
JG-77 Posted April 2, 2019 Share Posted April 2, 2019 That looks awesome! Great work! How long did painting and assembly take once you had everything printed? Link to comment Share on other sites More sharing options...
jlp94 Posted April 2, 2019 Share Posted April 2, 2019 Love that! Good job! Which coaster car models are you planning to make in the future? Link to comment Share on other sites More sharing options...
pǝʇɹǝʌuı Posted April 10, 2019 Share Posted April 10, 2019 Decided to explore this side of the forums and wow, this is incredible! The level of detail in that assembly...holy cow. Not surprised it took 200 hours of work to finish! In fact, I'm a bit surprised you got it done so quickly Link to comment Share on other sites More sharing options...
Sitroms Posted April 16, 2019 Author Share Posted April 16, 2019 Thank you for all your comments ! Painting and assembly took like 30 or 40 hours, but I had to be sure that all my surfaces were pretty smooth before painting, and that was THE boring part of this project for me, because it took even more time than painting and assembly and it was never perfect ... I already have started my new model, and I think you'll like the concept, more technical than esthetic this time. It's a launch model (so the most part of the model is a roller coaster station and a second part is a rising track). The propulsion is made with a pusher car below the track on a 50cm segment. Once accelerated , the car goes to the top of the curved track so it turnes back. Then, a brake system brakes the car, and a system made of wheels puts back the car at the beginning of the launch segment. I'll open a new topic to illustrate that because it can seem mysterious for you right now ahah. So for this new project you'll see the evolution of the work ! Link to comment Share on other sites More sharing options...
DoinItForTheFame Posted April 26, 2019 Share Posted April 26, 2019 Looks simply amazing!!! Can't wait to see the new project! Link to comment Share on other sites More sharing options...
fabian.gaus Posted January 19, 2020 Share Posted January 19, 2020 Does anyone have the STL files from Sitroms? I wrote him a pm but he was no longer online. Link to comment Share on other sites More sharing options...
Sitroms Posted January 19, 2020 Author Share Posted January 19, 2020 Does anyone have the STL files from Sitroms? I wrote him a pm but he was no longer online. Hi Fabian, I did not see your message sorry ! You can send me your e-mail adress by PM, so I could send you my files ! Link to comment Share on other sites More sharing options...
fabian.gaus Posted January 20, 2020 Share Posted January 20, 2020 Tank you, i wrote the pm at 26th December. I have resent a PM to you with my Email Adress Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now