
However a big thanks to @themeparkgirl on the Parkz.com.au forums for allowing me to use her photo to bring an update of the new Mack Hyper Coaster under construction at Movie World.
So far the speculation about length/height/name etc is still ongoing until the park makes the official announcement, but the consensuses is that it will be just over the 200ft mark, approx 4500ft long and may have up to 3 inversions similar to Flash in China.
The photos below show the area closest to the half way point of the ride, with the large Stengel Dive turn still around the 30m tall mark (to give you an idea of the height in the photos), into an inclined dive loop for the half way turn around. The track then comes back under itself, into a s-bend back over the track and to go under again. In photos late yesterday afternoon, it would also seem as this now leads into what could be a zero-g roll, although this should be completed by next weekend at the current speed of construction.
The only thing that the park as said is it is due to open in September 2017, so if your planning a trip down under around that time defiantly put Movie World on the list...
and now onto the update...